LC2280MA 2ph NEMA34 NEMA42 Stepper Motor Driver 80-220VAC 6.6A

  • Model: LC2280MA
  • Shipping Weight: 1Kg
  • In Stock:20
  • Manufactured by: LiChuan
Qty:          Favorite

Payment method Shipping method Contact us


0 reviews


LC2280MA  2ph NEMA34 NEMA42 Stepper Motor Driver 80-220VAC 6.6A

Product  Overview

  LC2280MA adopts the technology of servo control principle, with motor parameter adaptive functions, which guarantees that machine playing the

best performance. It’s suitable for type 86-130 of various brands of

two-phase hybrid stepping motors. This technology can greatly reduce the noise and vibration in the operation of the motor, making noise and

stability  to converge with the level of the servo motor when running.

Compared with the most similar subdivided driving products on the

market, the calorific value of stepper motor and drive fell to 15-30%.

 

Main Applications

It’s suitable for all kinds of automation equipment and instruments in the field of motion control ,such as: electronic processing and detection, semiconductor packaging, laser cutting and welding, laser typesetting, packing machines, engraving machine, marking machine, cutting machine, apparel plotter, NC machine tools, automated assembly equipment, etc. It’s the first choice for users that prefer low noise, high speed with superior  performance and with a stronger price competition.

Function Description of Drivers

 

drive function

operating instructions

Working current setting

The driver output current is set by three dip switches SW1 - SW3,

its output current has eight floors in all. About specific output current Settings, please refer to the drive panel.

Automatic half flow function

Users can set drive to automatic half flow function through SW4.

OFF shows the static current is set to be half of the dynamic current,

ON shows the static current is the same as dynamic current .

SW4 should be set to OFF in general use  in order to reduce the heating of the motor and driver , also to improve the reliability. The current will reduce to 50% automatically 0.4 seconds approximately after the pulse train stop (60% actual value), calorific value reduced by 36% in theory.

Micro step

subdivision

setting

 

The driver micro step subdivision is set by four dip switches SW5 -

SW8, there are 15 files of micro step subdivisions in all.

When users are setting segmentation, the driver should be stopped

first.  About the setting of micro step subdivision , please refer to the drive panel.

Indicator

light

 

Drives have two red and green lights.One of the green light is power light,It will be abidingly on after the driver is electrified; the other red light is fault  indicating lamp, when being overvoltage and overcurrent problems, trouble light will be abidingly on. After the fault being cleared, the red light turns off. When a driver becomes disabled, only re-up electricity and reuse can clear the fault.

Signal

   interface

PUL + and PUL - are the plus side and  minus side of  signal controlling.

DIR + and DIR - are the plus side and  minus side of direction signal.

ENA + and ENA -are the plus side and  minus side of enable signal.

Motor

interface

 

A + and A - connectting the plus and minus side of step motor A phase  

winding.   B + B and B -connectting the plus and minus side of step motor B phase winding.   When A, B two phase winding exchanges, can make the motor to reverse direction.

 

Power port

Using the dc power to supply,  operating voltage range is

suggested to be 80V-220VAC.

Installation

instructions

The  boundary  dimension of drive is : 197 * 105 * 84 mm,

The Installation pitch-row is 183 mm.

 Either horizontal or vertical installation can work,

(vertical installation is recommended).

When installation, should make it close to the metal cabinet to facilitate heat dissipation.

 

There are currently no product reviews.

1 2 3 4 5
Five Stars
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed