KTV804 compatible LCD display general 9 inch for CNC machine replace old RGB MDA EGA CGA industrial CRT monitor

  • Model: KTV804
  • Shipping Weight: 4Kg
  • In Stock:30
  • Manufactured by: CNTOP
Qty:          Favorite

Payment method Shipping method Contact us


0 reviews


KTV804 compatible LCD display general 9 inch for CNC machine replace old RGB MDA EGA CGA industrial CRT monitor

 

This product is used to replace a variety of CNC machine set old RGB, MDA, EGA, CGA industrial CRT monitors, wide compatibility, good effect.
Size 8.4-inch LCD, commonly known as 9-inch display.


KTV804 RGB, MDA, EGA, CGA special industrial monitors
1,supports the 15k to 48k line frequency signal, unrestricted field frequency input, automatic identification line field frequency input.
2,supports digital RGB, RGB analog and color, monochrome, black and white, grayscale and other video formats.
3,Supports both interlaced and progressive scanning modes.
4,Support for vertical resolution from 160 lines to 600 lines, automatic identification.
5,Support any level of resolution, automatic identification.
6,synchronizing signal separating support, the composite synchronization signal or the composite synchronizing signal on a video signal, automatic identification.
7, the output signal of the standard 800 x 600 VGA 60Hz field frequency or custom resolutions.
8, the input impedance of 75 ohms or 750 ohms offer two options, you can adapt weak signal equipment.

 

Model

KTV804 RGB EGA CGA MDA display

 

display size

174*131mm 8.4" 4:3

 

H&V scanning range

scan line signal:15Khz-48Khz positive and negative automatic adaptation

 

Field scan signal:48hz-75hz positive and negative automatic adaptation

 

Input signal

Signal type

MDA、CGA、EGA、VGA
RGB、RGsB、RGBS、RGBHV

 

Synchronous mode

HV line field separate,HV line field blending Cs,Green sync Sog

 

TTL digital level 2.4-5.0V or Low 0-0.8V

 

Analog level 0.7-2.5VP-P

 

Input impedance

75-500 ohm high input impedance, automatically adapt to a variety of strong and weak signal source.

 

Scanning mode

Interlaced scan / progressive scan

 

The signal line

9 pin  or 15 pin

 

Display color

262K, monochrome, black and white

 

contrast ratio

450:1

 

Brightness

400 cd/m2

 

work environment

Temperature: -10-+65,humidity: 20%-95%

 

Installation size

Including installation of border 240*150*50mm

 

power adapter

External AC100V/240V to DC12V power, power: 18W,
Optional DC 24V power supply

 

 

The interface of the display

 

  1. VIDEO IN: used to connect the 15 pin D signal line or the 9 pin D signal line input.(choose one only)
  2. DC 12V: display power input, used to connect the power adapter.(can choose 24VDC)

 

9 pin connector


If you choose 15pin connector

 

If need know more details, please contact with us.

 

If you don’t know it it’s matching your requirement, please contact with me and send me details about your monitor. The engineer will advise.

 

 

 

 

 

 

 

 

 

 

 

 

There are currently no product reviews.

1 2 3 4 5
Five Stars
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed