DVPDNET-SL Delta S Series PLC Left-Side High-Speed Communication Module new in box

  • Model: DVPDNET-SL
  • Shipping Weight: 1Kg
  • In Stock:20
  • Manufactured by: Delta
Qty:          Favorite

Payment method Shipping method Contact us


0 reviews


DVPDNET-SL Delta S Series PLC Left-Side High-Speed Communication Module new in box

Introduction

- Supports Group 2 server device and Group 2 only server device.

- Supports DeviceNet Master mode and Slave mode.

- Supports EDS file configure in ElinkConfigurator software.

- Supports network establishing all kinds of IO connections: polled, bit-strobe, change of state and cyclic.

- Supports explicit connection via Predefined Master/Slave Connection Set. (explicit message)

- Offers 380 bytes for I/O input data and 380 bytes for I/O output data.

Specifications

DeviceNet Connection

Interface

Removable connector (5.08mm)

Transmission method

CAN

Transmission cable

2-wire twisted shielded cable with 2-wire bus power cable and drain

Electrical isolation

500VDC

Communication

Message type

I/O polled, bit-strobe, change of state/cyclic

Baud rates

125 Kbps; 250 Kbps; 500 Kbps

Product code

64

Product type

12

Vendor ID

799 (Delta Electronics Inc.)

Electrical Specification

DeviceNet

Module power voltage: All other power derived from PLC controller power supply

Network power input: 11 ~ 25V DC; Current: less than 50mA (25V DC)

Environment

Noise immunity

ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge

EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV,

Analog & communication I/O: 1KV

Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV

RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m

Environment

Operation: 0ºC ~ 55ºC (temperature); 50 ~ 95% (humidity); pollution degree 2

Storage: -40 ºC ~ 70ºC (temperature); 5 ~ 95% (humidity)

Vibration/shock

resistance

Standard: IEC1131-2, IEC 68-2-6 (TEST Fc)/IEC1131-2 & IEC 68-2-27 (TEST

Ea)

 

There are currently no product reviews.

1 2 3 4 5
Five Stars
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed