36W-200W 24V-50VDC All Digital Brushed DC Servo Motor Driver JMC MCDC706

  • Model: MCDC706
  • Shipping Weight: 0.5Kg
  • In Stock:50
  • Manufactured by: JMC
Qty:          Favorite

Payment method Shipping method Contact us


0 reviews


36W-200W 24V-50VDC All Digital Brushed DC Servo Motor Driver JMC MCDC706

 

Working voltage:24-50VDC
Optical coupling isolation servo reset input interface ERC
Have real-time virtual oscilloscope, can display the parameter curve about the motor running current, speed ,tracking error and so on.
Can set the PID parameters of position loop, speed loop and current loop.
You can choose the encoder according the encoder cable. and you can setting pulse equivalent according the inside electronic gear ratio.
Using RS232C port, through PC testing software change parameter.
Over-current, I2T, overvoltage , undervoltage, overheating, speeding and differential protection
When the indicator light turns green, it means running. when the indicator light turns red, it means protection or offline.

 

Typical applications

Suitable for inkjet printing and dispensing machine.

 

Performance indicators:

MCDC706 is all-digital DC servo drive system adopts high-performance digital signal processor (DSP) and integrated circuit, and come out to be a cost effective product with simple circuit, high integration, easy operation, and strong practicability. MCDC706 provide three feedback loops:(position loop, velocity loop and current loop). Three work control mode: position, velocity and torque. MCDC706 matches with DC servo motor under 24~50V and 30~300W. 

Electrical indicators:

Instructions

Min

Typical values

Max

Supply voltage (VDC)

24V

36V

50V

Output current (A)

-

6

-

Input current (mA)

-

10

-

Work pulse frequency (KHZ)

-

-

250

Low level pulse time (US)

2.5

-

-

 

Environmental indicators:

cooling

natural cooling or forced convection

Environment

Space

Avoid dust,oil frost and corrosive gases

Work temperature

0~+50℃

Storage temperature

-20℃~+80℃

Humidity

40~90%RH

Dimension

-

118×76×35

Weight

-

300g

 

P1 input signal interface description:

symbol

function

Description

PUL+

Input signal photoelectric isolation positive end

Connected to the +5V power supply, +5V~+24V can be driven, higher than +5V need to limit the current resistance

PUL-

Step pulse signal

Down along the effective, whenever the pulse from high to low when the motor to take one step, the input resistance 220ohm, the requirements: low level 0-0.5, high level 4-5V, pulse width of less than 2.5US

DIR+

Input signal photoelectric isolation positive end

Connected to the +5V power supply, +5V~+24V can be driven, higher than +5V need to limit the current resistance

DIR-

Direction control signal

For changing the motor steering, input resistance 220ohm, requirements: low level 0-0.5, high level 4-5V, pulse width less than 2.5US

ERC+

Input signal photoelectric isolation positive end

Connected to the +5V power supply, +5V~+24V can be driven, higher than +5V need to limit the current resistance

ERC-

Motor release signal

Active (low level) to cut off the motor coil current, the driver stops working, the motor is in a free state

ALLM+

Alarm output positive

 

EGND

Alarm output negative pole

 

 

P2 motor encoder interface description

Terminal number

symbol

symbol

Name

description

1

Motor line

S-

DC brushed motor - end

 

2

S+

DC brushed motor +end

 

3

VDC

Input DC power supply+

DC24V-50V

4

Power input

GND

Input ground

0V

 

 

There are currently no product reviews.

1 2 3 4 5
Five Stars
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed