Your cart is empty.
2S42Q-02940+2M420 2PH 42mm NEMA17 0.87A 0.24NM 34ozin 24-40VDC Stepper motor Drive kits
- Model: 2S42Q-02940+2M420
- Shipping Weight: 1Kg
- In Stock:10
- Manufactured by: Kinco
0 reviews
Specifications
|
Model |
2S42Q-02940 |
|
Step Angle |
1.8centigrade degree±5% |
|
Phase Current (A) |
0.87 |
|
Holding Torque (Nm) |
0.24 |
|
Damping Torque (Nm) |
0.02 |
|
Winding Resistance (Ω) |
3.3±10% |
|
Winding Inductance(mH) |
5.0±20% |
|
Motor Inertia (Kg.com²) |
0.06 |
|
Motor Length L(mm) |
40 |
|
Number of Lead Wires |
4 |
|
Insulation Class |
B |
|
Withstand Voltage Level |
500VAC,One Minute |
|
Max.Axial Load (N) |
10 |
|
Max.Readial Load (N) |
28 |
|
Operating Temperature |
-20centigrade degree~50centigrade degree |
|
Surface Temperature Rise |
Max.80centigrade degree ~Rated Phase Current after Two Phases are Connected) |
|
Insulation Impedance |
Minimum 100MΩ,500VDC |
|
Weight (Kg) |
0.28 |
|
Lead Wire Length (mm) |
320±10 |
Hybrid Servo Drive 2M420
Features:
The Maximum Supply Voltage can Reach 40V, Which can Provide Better Dynamic Drive Performance;
The Bipolar Constant Current Drive Mode is Taken with a Maximum Drive Current up to 2.5A Per Phase, Which can Drive any Two-Phase Bipolar Hybrid Stepper Motors with a Current Less than 2.5A;
The Drive Output Phase Current of a Motor can be Regulated Through the DIP Switch, to Match Motors of Different Specifications;
A DIP Switch is Used to Set the Automatic Half Current Function of Motors in Statically Locked Status, which can Greatly Reduce Heat Dissipation of the Motors;
A Dedicated Control Chip is Used, with a Maximum of 256/200 Subdivisions. The Subdivision Function can be Set by the DIP Switch, to Ensure the Best Operation Stability;
Supporting Offline Function, So that the Output Current of a Motor can be Cut Off If Necessary;
Optical Coupling Devices are Used for the Isolation of the Input Circuit of the Control Signals to Reduce Interference of External Noises.
Specification
|
Model |
2M420 |
|
Supply Voltage |
DC 24V ~ 40V |
|
Output Phase Current |
0.3A~ 2.5A |
|
Control Signal Input Current |
6~16mA |
|
Cooling Method |
Natural Air Cooling |
|
Operating Environment |
Avoid the Environment with a Great Amount of Metallic Powder, Oil Mist, or Erosive Gases |
|
Operating Temperature |
-10centigrade degree~ +45centigrade degree |
|
Operating Humidity |
<85% (Non-Condensing) |
|
Weight |
0.4 Kg |
There are currently no product reviews.
