2S42Q-02940+2M420 2PH 42mm NEMA17 0.87A 0.24NM 34ozin 24-40VDC Stepper motor Drive kits

  • Model: 2S42Q-02940+2M420
  • Shipping Weight: 1Kg
  • In Stock:10
  • Manufactured by: Kinco
Qty:          Favorite

Payment method Shipping method Contact us


0 reviews


Specifications

Model

2S42Q-02940

Step Angle

1.8centigrade degree±5%

Phase Current (A)

0.87

Holding Torque (Nm)

0.24

Damping Torque (Nm)

0.02

Winding Resistance (Ω)

3.3±10%

Winding Inductance(mH)

5.0±20%

Motor Inertia (Kg.com²)

0.06

Motor Length L(mm)

40

Number of Lead Wires

4

Insulation Class

B

Withstand Voltage Level

500VAC,One Minute

Max.Axial Load (N)

10

Max.Readial Load (N)

28

Operating Temperature

 -20centigrade degree~50centigrade degree

Surface Temperature Rise

Max.80centigrade degree ~Rated Phase Current after Two Phases are Connected)

Insulation Impedance

Minimum 100MΩ,500VDC

Weight (Kg)

0.28

Lead Wire Length (mm)

320±10

Hybrid Servo Drive 2M420

Features:

The Maximum Supply Voltage can Reach 40V, Which can Provide Better Dynamic Drive Performance;

The Bipolar Constant Current Drive Mode is Taken with a Maximum Drive Current up to 2.5A Per Phase, Which can Drive any Two-Phase Bipolar Hybrid Stepper Motors with a Current Less than 2.5A;

The Drive Output Phase Current of a Motor can be Regulated Through the DIP Switch, to Match Motors of Different Specifications;

A DIP Switch is Used to Set the Automatic Half Current Function of Motors in Statically Locked Status, which can Greatly Reduce Heat Dissipation of the Motors;

A Dedicated Control Chip is Used, with a Maximum of 256/200 Subdivisions. The Subdivision Function can be Set by the DIP Switch, to Ensure the Best Operation Stability;

Supporting Offline Function, So that the Output Current of a Motor can be Cut Off If Necessary;

Optical Coupling Devices are Used for the Isolation of the Input Circuit of the Control Signals to Reduce Interference of External Noises.

Specification

Model

2M420

Supply Voltage

DC 24V ~ 40V

Output Phase Current

0.3A~ 2.5A

Control Signal Input Current

6~16mA

Cooling Method

Natural Air Cooling

Operating Environment

Avoid the Environment with a Great Amount of Metallic Powder, Oil Mist, or Erosive Gases

Operating Temperature

-10centigrade degree~ +45centigrade degree

Operating Humidity

<85% (Non-Condensing)

Weight

0.4 Kg

 

There are currently no product reviews.

1 2 3 4 5
Five Stars
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed