Your cart is empty.
2MA860H 2phase NEMA23 NEMA34 NEMA42 stepper motor driver controller amplifier AC50-80V 2.5-6A
- Model: 2MA860H
- Shipping Weight: 1Kg
- In Stock:49
0 reviews
Model: 2MA860H
Name: 2MA860H JMC stepper motor driver
Detailed information:
performance index:
2MA860H a such angle constant torque micro stepping driver, drive AC voltage 50-80V (DC70-110V), suitable with current in 6a and outside 57.86MM types of two-phase hybrid stepping motor. The drive internal uses the advanced technology, the circuit can enable high-speed operation of the motor torque, the motor has good acceleration performance, low fever, stepper pulse stopped more than 100m / s, drive current automatically halved. The positioning accuracy is up to 12800 steps / turn. Widely used in crystal machine, engraving machine, etc..
features:
1:AC50-80V AC (DC70-110V) power supply suitable for the most severe power grid environment; H bridge bipolar constant phase flow subdivision drive;
2: the original speed adaptive circuit, automatic optimization; subdivision of the current set of convenient;
3:1-64 breakdown of 16 operating modes; over current, over voltage, under voltage, short circuit protection; off line (ENA) protection function.
Electrical index Environmental indicator
|
Instructions |
Min |
Typical |
Max |
|
cooling |
Natural cooling or forced cooling |
|
|
voltage(VAC) |
30V |
60VAC |
75V |
Use environment |
occasion |
Avoid dust, oil mist and corrosive gases. |
|
|
Working current(A) |
1.5A |
----- |
6A |
Storage temperature |
-10·C~80·C |
||
|
Logic input current (mA) |
|
10 |
|
Maximum ambient temperature |
-10·C~65·C |
||
|
Step pulse rate (KHZ) |
---- |
---- |
200 |
Ambient humidity |
Not dew, not water |
||
|
Pulse low time (US) |
2.5 |
---- |
---- |
Vibration |
|
5.9m/s2Max |
|
|
|
|
|
|
weight |
|
0.6Kg |
|
interface functions
P1 input signal interface description
|
symbol |
function |
description |
|
PLS+ |
Input signal photoelectric isolation positive end |
Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance |
|
PLS- |
Step pulse signal |
Down along the effective, whenever the pulse from high to low when the motor to take a step. Input resistance 220 ohm, requirements: low level 0~0.5V, high level 4~5V, pulse width >2.5uS. |
|
DIR+ |
Input signal photoelectric isolation positive end |
Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance |
|
DIR- |
Direction control signal |
Used to change the steering of a motor. Input resistance 220 ohm, requirements: low level 0~0.5V, high level 4~5V, pulse width >2.5uS. |
|
ENA+ |
Input signal photoelectric isolation positive end |
Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance |
|
ENA- |
Motor release signal |
Active (low level) when turn off the motor coil current, the drive stops working, the motor is in a free state. |
|
phase |
Model |
Current(A) |
Voltage(V) |
micorsteps |
For motor |
weight(kg) |
size(mm) |
Control signal |
|
2phase |
2M415 |
0.21-1.5A |
DC(24-36V) |
2-64 |
35.42 |
0.2 |
86*55*20 |
single |
|
2M420 |
0.3-2.5A |
DC(24-48V) |
2-128.5-125 |
42.57 |
0.2 |
118*75.5*33 |
single |
|
|
2M542-N |
1.0-4.2A |
DC(24-48V) |
2-128.5-125 |
57.86 |
0.27 |
118*75.5*34 |
differential |
|
|
2M656 |
1.3-5.6A |
DC(24-48V) |
1-64.2.5-50 |
57.86 |
0.27 |
118*75.5*34 |
differential |
|
|
2M982 |
1.8-7.8 |
DC(30-80V) |
1-64.2.5-50 |
57.86 |
0.57 |
150*97.5*48 |
differential |
|
|
2MA860H |
2.5-6A |
AC(50-80V) |
1-64.2.5-50 |
57.86.110 |
0.6 |
150-97.5*53 |
differential |
|
|
MA960H |
2.5-6A |
AC(50-80V) |
2-64 |
57.86.110 |
0.6 |
150*97.5*53 |
differential |
|
|
2M2260 |
2.5-6A |
AC(80-220V) |
1-64.2.5-50 |
86.110.130 |
1.5 |
198*104*86 |
differential |
|
|
2M2280 |
2.2-8.5A |
AC(80-220V) |
1-64.2.5-50 |
110.130 |
1.8 |
198*136.5*88 |
differential |
|
|
|
3M660 |
1.3-5.8A |
DC(24-48V) |
1-64.2.5-50 |
57.86 |
0.27 |
118*75.5*34 |
differential |
|
3M860 |
2.0-8.3A |
DC(24-80V) |
1-64.2.5-50 |
57.86 |
0.57 |
150*97*48 |
differential |
|
|
3M2060H |
1.3-5.6A |
AC(80-220V) |
1-64.2.5-50 |
86.110.130 |
1.5 |
198*104*86 |
differential |
|
|
3M2080 |
2.2-8.5A |
AC(80-220) |
1-64.2.5-50 |
110.130 |
1.5 |
198*136.5*88 |
differential |
There are currently no product reviews.
