2MA860H 2phase NEMA23 NEMA34 NEMA42 stepper motor driver controller amplifier AC50-80V 2.5-6A

  • Model: 2MA860H
  • Shipping Weight: 1Kg
  • In Stock:49
Qty:          Favorite

Payment method Shipping method Contact us


0 reviews


Model: 2MA860H
Name: 2MA860H JMC stepper motor driver
Detailed information:

performance index:

2MA860H a such angle constant torque micro stepping driver, drive AC voltage 50-80V (DC70-110V), suitable with current in 6a and outside 57.86MM types of two-phase hybrid stepping motor. The drive internal uses the advanced technology, the circuit can enable high-speed operation of the motor torque, the motor has good acceleration performance, low fever, stepper pulse stopped more than 100m / s, drive current automatically halved. The positioning accuracy is up to 12800 steps / turn. Widely used in crystal machine, engraving machine, etc..
features:
1:AC50-80V AC (DC70-110V) power supply suitable for the most severe power grid environment; H bridge bipolar constant phase flow subdivision drive;

2: the original speed adaptive circuit, automatic optimization; subdivision of the current set of convenient;

3:1-64 breakdown of 16 operating modes; over current, over voltage, under voltage, short circuit protection; off line (ENA) protection function.

 

Electrical index                                                                            Environmental indicator

 Instructions

Min

Typical

Max

       

cooling

Natural cooling or forced cooling

voltage(VAC)

30V

60VAC

75V

Use environment
 
 
 

occasion

Avoid dust, oil mist and corrosive gases.

Working current(A)

1.5A

-----

6A

Storage temperature

-10·C~80·C

Logic input current (mA)

 

10

 

Maximum ambient temperature

-10·C~65·C

Step pulse rate (KHZ)

----

----

200

Ambient humidity

Not dew, not water

Pulse low time (US)

2.5

----

----

Vibration

 

5.9m/s2Max

 

 

 

 

weight

 

0.6Kg

interface functions 

P1 input signal interface description    

 

symbol

function

description

PLS+

Input signal photoelectric isolation positive end

Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance

PLS-

Step pulse signal

Down along the effective, whenever the pulse from high to low when the motor to take a step. Input resistance 220 ohm, requirements: low level 0~0.5V, high level 4~5V, pulse width >2.5uS.

DIR+

Input signal photoelectric isolation positive end

Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance

DIR-

Direction control signal

Used to change the steering of a motor. Input resistance 220 ohm, requirements: low level 0~0.5V, high level 4~5V, pulse width >2.5uS.

ENA+

Input signal photoelectric isolation positive end

Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance

ENA-

Motor release signal

Active (low level) when turn off the motor coil current, the drive stops working, the motor is in a free state.

 

phase

Model

Current(A)

Voltage(V)

micorsteps

For motor

weight(kg)

size(mm)

Control signal

2phase

2M415

0.21-1.5A

DC(24-36V)

2-64

35.42

0.2

86*55*20

single

2M420

0.3-2.5A

DC(24-48V)

2-128.5-125

42.57

0.2

118*75.5*33

single

2M542-N

1.0-4.2A

DC(24-48V)

2-128.5-125

57.86

0.27

118*75.5*34

differential 

2M656

1.3-5.6A

DC(24-48V)

1-64.2.5-50

57.86

0.27

118*75.5*34

differential

2M982

1.8-7.8

DC(30-80V)

1-64.2.5-50

57.86

0.57

150*97.5*48

differential

2MA860H

2.5-6A

AC(50-80V)

1-64.2.5-50

57.86.110

0.6

150-97.5*53

differential

MA960H

2.5-6A

AC(50-80V)

2-64

57.86.110

0.6

150*97.5*53

differential

2M2260

2.5-6A

AC(80-220V)

1-64.2.5-50

86.110.130

1.5

198*104*86

differential

2M2280

2.2-8.5A

AC(80-220V)

1-64.2.5-50

110.130

1.8

198*136.5*88

differential


3phase

3M660

1.3-5.8A

DC(24-48V)

1-64.2.5-50

57.86

0.27

118*75.5*34

differential

3M860

2.0-8.3A

DC(24-80V)

1-64.2.5-50

57.86

0.57

150*97*48

differential

3M2060H

1.3-5.6A

AC(80-220V)

1-64.2.5-50

86.110.130

1.5

198*104*86

differential

3M2080

2.2-8.5A

AC(80-220)

1-64.2.5-50

110.130

1.5

198*136.5*88

differential

 
 

 

There are currently no product reviews.

1 2 3 4 5
Five Stars
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed