2M420 2phase NEMA17 stepper motor driver controller amplifier DC24-48V 0.3-2.5A
- Model: 2M420
- Shipping Weight: 0.5Kg
- In Stock:50
Model:2M420
Name:2M420 JMC stepper motor driver
Detailed information:
performance index:
2M420 subdivision two-phase hybrid stepper motor driver, the use of DC 20-40V power supply, suitable for current less than 3A, outside diameter 42-57 mm of the two-phase hybrid stepper motor. This drive with DSP based AC servo drive current loop subdivision control, motor torque fluctuation is small, low speed running very smooth, almost no vibration and noise, high speed when the torque is much higher than that in the other two drive, positioning accuracy high. Widely used in engraving machine, CNC machine tools, packaging machinery and other high resolution requirements of the equipment.
features:
1, average current control, two phase sinusoidal current drive output; DC 20-40V power supply;
2, photoelectric isolation signal input / output, there are over voltage, under voltage, over current, phase to phase short circuit protection function;
3, 15 file segmentation and automatic flow function; eight output phase current settings
4, with an off-line command input terminal, the torque of the motor is related to the speed of the motor, which has nothing to do with the number of steps per revolution;
5, high starting speed, high speed torque.
Electrical index Environmental indicator
Instructions |
Min |
Typical |
Max |
|
cooling |
Natural cooling or forced cooling |
|
voltage(VDC) |
20 |
24V |
40 |
Use environment |
occasion |
Avoid dust, oil mist and corrosive gases. |
|
Working current(A) |
0.64 |
----- |
2.12 |
Storage temperature |
-40·C~70·C |
||
Logic input current (mA) |
|
10 |
|
Maximum ambient temperature |
-10·C~45·C |
||
Step pulse rate (KHZ) |
---- |
---- |
200 |
Ambient humidity |
Not dew, not water |
||
Pulse low time (US) |
2.5 |
---- |
---- |
Vibration |
|
5.9m/s2Max |
|
|
|
|
|
weight |
|
0.1Kg |
interface functions
P1 input signal interface description
symbol |
function |
description |
PLS+ |
Input signal photoelectric isolation positive end |
Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance |
PLS- |
Step pulse signal |
Down along the effective, whenever the pulse from high to low when the motor to take a step. Input resistance 220 ohm, requirements: low level 0~0.5V, high level 4~5V, pulse width >2.5uS. |
DIR+ |
Input signal photoelectric isolation positive end |
Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance |
DIR- |
Direction control signal |
Used to change the steering of a motor. Input resistance 220 ohm, requirements: low level 0~0.5V, high level 4~5V, pulse width >2.5uS. |
ENA+ |
Input signal photoelectric isolation positive end |
Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance |
ENA- |
Motor release signal |
Active (low level) when turn off the motor coil current, the drive stops working, the motor is in a free state. |
phase |
Model |
Current(A) |
Voltage(V) |
micorsteps |
For motor |
weight(kg) |
size(mm) |
Control signal |
2phase |
2M415 |
0.21-1.5A |
DC(24-36V) |
2-64 |
35.42 |
0.2 |
86*55*20 |
single |
2M420 |
0.3-2.5A |
DC(24-48V) |
2-128.5-125 |
42.57 |
0.2 |
118*75.5*33 |
single |
|
2M542-N |
1.0-4.2A |
DC(24-48V) |
2-128.5-125 |
57.86 |
0.27 |
118*75.5*34 |
differential |
|
2M656 |
1.3-5.6A |
DC(24-48V) |
1-64.2.5-50 |
57.86 |
0.27 |
118*75.5*34 |
differential |
|
2M982 |
1.8-7.8 |
DC(30-80V) |
1-64.2.5-50 |
57.86 |
0.57 |
150*97.5*48 |
differential |
|
2MA860H |
2.5-6A |
AC(50-80V) |
1-64.2.5-50 |
57.86.110 |
0.6 |
150-97.5*53 |
differential |
|
MA960H |
2.5-6A |
AC(50-80V) |
2-64 |
57.86.110 |
0.6 |
150*97.5*53 |
differential |
|
2M2260 |
2.5-6A |
AC(80-220V) |
1-64.2.5-50 |
86.110.130 |
1.5 |
198*104*86 |
differential |
|
2M2280 |
2.2-8.5A |
AC(80-220V) |
1-64.2.5-50 |
110.130 |
1.8 |
198*136.5*88 |
differential |
|
|
3M660 |
1.3-5.8A |
DC(24-48V) |
1-64.2.5-50 |
57.86 |
0.27 |
118*75.5*34 |
differential |
3M860 |
2.0-8.3A |
DC(24-80V) |
1-64.2.5-50 |
57.86 |
0.57 |
150*97*48 |
differential |
|
3M2060H |
1.3-5.6A |
AC(80-220V) |
1-64.2.5-50 |
86.110.130 |
1.5 |
198*104*86 |
differential |
|
3M2080 |
2.2-8.5A |
AC(80-220) |
1-64.2.5-50 |
110.130 |
1.5 |
198*136.5*88 |
differential |
There are currently no product reviews.