N2-415-H3 TECO 3 phase 400V 25A output 11KW 15HP Inverter VFD frequency AC drive NEW
- Model: N2-415-H3
- Shipping Weight: 14Kg
- In Stock:20
![](images/star-on.png)
![](images/star-on.png)
![](images/star-on.png)
![](images/star-on.png)
![](images/star-on.png)
Product Specifications
1/ 3 Phase 200-240 Volts
N2-xxx—xxx |
2P5 |
201 |
202 |
203 |
205 |
208 |
210 |
215 |
220 |
230 |
Horse Power |
1/2
|
1 |
2 |
3 |
5 |
7.5 |
10 |
15 |
20 |
30 |
Rated Motor KW |
0.4 |
0.75 |
1.5 |
2.2 |
3.7 |
5.5 |
7.5 |
11 |
15 |
22 |
Rated Current (A) |
3.1 |
4.5 |
7.5 |
10.5 |
17.5 |
26 |
35 |
49 |
64 |
87 |
Output (KVA) |
1.2 |
1.7 |
2.9 |
4.0 |
6.7 |
9.9 |
13.3 |
18.7 |
24.4 |
33.2 |
Input Voltage Max. |
(1 / 3 Phase) (200~240 Volts +-10%) (50/60Hz +-5%) (5 h.p. & above 3 Phase Only) |
|||||||||
Output Voltage Max. |
3 Phase 200 ~ 240 (proportional to input voltage) |
|||||||||
IP20 Weight (Kg) |
1.4 |
1.4 |
2.5 |
4.0 |
4.0 |
6.8 |
7.1 |
12.3 |
12.5 |
13.8 |
Power Loss Ride Through (s) |
1 |
1 |
2 |
2 |
2 |
2 |
2 |
2 |
2 |
2 |
3 Phase 380 ~ 480 Volts
N2-xxx—xxx |
401 |
402 |
403 |
405 |
408 |
410 |
415 |
420 |
430 |
Horse Power |
1
|
2 |
3 |
5 |
7.5 |
10 |
15 |
20 |
30 |
Rated Motor KW |
0.75 |
1.5 |
2.2 |
3.7 |
5.5 |
7.5 |
11 |
15 |
22 |
Rated Current (A) |
2.3 |
3.8 |
5.2 |
8.8 |
13 |
17.5 |
25 |
32 |
48 |
Output (KVA) |
1.7 |
2.9 |
4.0 |
6.7 |
9.9 |
13.3 |
19.1 |
24.4 |
36.6 |
Input Voltage Max |
( 3 Phase 380 ~ 480 Volts +- 10%) (50/60Hz +- 5%) |
||||||||
Output Voltage Max. |
3 Phase 380 ~ 480 Volts (proportional to input voltage) |
||||||||
IP20 Weight (Kg) |
2.4 |
2.5 |
3.8 |
4.0 |
7.0 |
7.3 |
12.3 |
12.5 |
13.5 |
Power Loss Ride Through (s) |
1 |
1 |
2 |
2 |
2 |
2 |
2 |
2 |
2 |
Functional Specification
Control Characteristics |
Carrier frequency |
1 - 12 K |
|
Frequency Control Range |
0.1 – 400 Hz |
||
Frequency Accuracy |
Digital: 0.01% (-10 ~ 40 °C); Analog: 0.4% (25+-10 °C) |
||
Frequency Resolution |
0.01 Hz with computer or PLC control, 0.1 Hz with keypad control when freq. above 100 Hz |
||
Frequency Setting Signal |
(0-5VDC) (0-10VDC) (4-20mA) (0-20mA) |
||
Accel / Decel Time |
0.1-3600 SEC with (2) S-curves |
||
Braking Torque |
About 20% (built-in Braking transistor) |
||
V/F Pattern |
18 patterns, one curve programmable |
||
Protection Function |
Instantaneous Over Current |
Approx. 200% rated current |
|
Overload |
T-verter: 150% / 1 minute |
||
Motor Overload Protection |
Electronic thermal overload relay |
||
Over voltage |
200V series: (DC bus voltage exceeds 427V) 400v series: (DC bus voltage exceeds 854V) |
||
Under voltage |
200V series: (DC bus voltage drops < 200V) 400v series: (DC bus voltage drops < 400V) |
||
Momentary Power Loss |
0~2 seconds: The T-verter can be restarted using the speed search feature |
||
Heat Sink Fin Overheat |
Protected by thermister |
||
Ground Fault |
Electronic circuit protection |
||
Operation Conditions |
Input Signal |
Operation signals |
Forward/Reverse operation, by keypad or hardwire contact, multiple individual commands |
Reset |
Released protection while the protective function is operating |
||
Multifunction Input |
Refer to function illustration in Fn_56 |
||
Output Signal |
Multifunction Output |
Refer to function illustration in Fn_61 |
|
Fault output |
250VAC 1A, 30VDC 1A or less |
||
Built-in Function |
Frequency reference bias/gain; up/lower limit; manual torque boost; frequency meter calibrating gain; auto restart attempt; skip frequency; S-curve ACCEL/DECEL; Carrier frequency adjust.(1-12KHz) Communication link function |
||
Digital operator monitor |
Frequency command, output frequency, speed, output current, output voltage, P-N bus voltage, rotating direction |
||
Analog Output Monitor |
Analog output (0-10V), possible to select output frequency & setting freq. & output voltage & P-N bus voltage |
||
Environmental |
Location |
Indoor (protected from corrosive gas and dust) |
|
Ambient Temperature |
-10 degrees ~ 40 degrees © 50 degrees with cover removed |
||
Humidity |
0-95%(non condensing) |
||
Vibration |
0.5G |
||
Enclosure |
IP20 / IP65 (NEMA4) |
||
EMC |
EN50081-1, EN50082-2 (with optional filter) |
||
LVD |
EN50178 |
||
UL |
UL 508C |
N2-205 and above capacity are not CE complied
Wiring
There are currently no product reviews.