Product Overview

LC2054DA drive, with lower motor heating, running noise and higher stability, and lower costs, the main driver of 42, 57 type two-phase hybrid stepping motor. Its micro-step breakdown of the number of 15 species, the maximum number of steps to 25000Pulse / rev; its operating peak current range of 1.0A-4.2A, output current total of eight files, the current resolution of about 0.45A; with automatic semi-flow, Overvoltage and overcurrent protection functions. The drive to DC power supply, the proposed operating voltage range of 24VDC-36VDC, voltage does not exceed 50VDC, not less than 20VDC.
The main application areas
For a variety of small and medium sized automation equipment and instruments, such as: engraving machine, marking machine, cutting machine, laser machining, CNC machine tools, automatic assembly equipment. Users expect a low-cost, low-noise, high-speed device applications excellent special effects.

Basic parameters:

Input voltage: 20 ~ 50V DC input
Input Current: less than 4 amps
Output Current: 1.0A ~ 4.2A
Power consumption Power: 80W; Internal Insurance: 6A
Temperature: Operating temperature -10 ~ 45 ; Storage temperature -40 ~ 70
Humidity: condensation can not, can not have water droplets
Gas: prohibited flammable gases and conductive dust
Weight: 200 g

Main features:

1 Average current control, two-phase sinusoidal current drive output
2 DC 20 ~ 50V power supply
3 optically isolated signal input / output
4 overvoltage, undervoltage, overcurrent, phase short circuit protection
5 sixteen file segmentation and automatic semi-flow function
6 eight stalls output phase current setting
7 having Offline command input terminal
8 Motor torque with its speed, but not to the number of steps per motor revolution
9 High start speed
10-speed torque

PLS +: Pulse signal input positive terminal or positive pulse signal input positive terminal

PLS-: Pulse signal input negative terminal or positive pulse signal input negative end

DIR +: Stepping direction signal input positive terminal or negative pulse signal input positive terminal

DIR-: Stepping direction signal input negative terminal or negative pulse signal input negative end

ENA +: Offline enable reset signal input positive terminal

ENA-: Offline enable reset signal input negative end