HG-SR702BJ+MR-J4-700B 26A 7KW 33.4NM 2000rpm Brake Oil seal AC Servo Motor Drive Kit with 3M Cable New
- Model: HG-SR702BJ+MR-J4-700B
- Shipping Weight: 43Kg
- In Stock:10
- Manufactured by: Mitsubishi




 0 reviews
                                        0 reviews                                         
                                    | HG-SR702BJ+MR-J4-700B 26A 7KW 33.4NM 2000rpm Brake Oil seal AC Servo Motor Drive Kit with 3M Cable New | 
Motor Specifications:
| Servo motor Model HG-SR_ | 52(B) | 102(B) | 152(B) | 202(B) | 352(B) | 502(B) | 702(B) | |
| Power facility capacity [kVA] | 1.0 | 1.7 | 2.5 | 3.5 | 5.5 | 7.5 | 10 | |
| Continuous running duty | Rated output [KW] | 0.5 | 1.0 | 1.5 | 2.0 | 3.5 | 5.0 | 7.0 | 
| Rated torque [Nm] | 2.4 | 4.8 | 7.2 | 9.5 | 16.7 | 23.9 | 33.4 | |
| Maximum torque [Nm] | 7.2 | 14.3 | 21.5 | 28.6 | 50.1 | 71.6 | 1000 | |
| Rated rotation speed | 2000[rpm] | |||||||
| Maximum rotation speed | 3000[rpm] | |||||||
| Permissible instantaneous rotation speed | 3450[rpm] | |||||||
| Rated current [A] | 2.9 | 5.6 | 9.4 | 9.6 | 14 | 22 | 26 | |
| Maximum current [A] | 9.0 | 17.4 | 29.1 | 30.7 | 44.8 | 70.4 | 83.2 | |
| Weight [kg] | 4.8 | 6.2 | 7.3 | 11 | 16 | 20 | 27 | |
| Weight [kg]( With Brake) | 6.7 | 8.2 | 9.3 | 17 | 22 | 26 | 33 | |
Drive Specifications:
| mode name | MR-J4-700B | |
| Stocked Item | S | |
| Output | Rated Voltage | 3-phase 170 VAC | 
| Rated Current (A) | 37.0 | |
| Main Circuit Power Supply | Voltage/Frequency | 3-phase 200 VAC to 240 VAC, 50/60 Hz | 
| Rated Current (A) | 28.9 | |
| Permissible Voltage Fluctuation | 3-phase 170 VAC to 264 VAC | |
| Permissible Frequency Fluctuation | ±5% maximum | |
| Control Circuit Power Supply | Voltage/Frequency | 1-phase 200 VAC to 240 VAC, 50/60 Hz | 
| Rated Current (A) | 0.3 | |
| Permissible Voltage Fluctuation | 1-phase 170 VAC to 264 VAC | |
| Permissible Frequency Fluctuation | ±5% maximum | |
| Power Consumption (W) | 45 | |
| Interface Power Supply | 24 VDC ±10% (required current capacity: 0.3 A (including CN8 connector signal)) | |
| Load-Side Encoder Interface | Mitsubishi high-speed serial communication | |
| Tolerable Regenerative Power of the Built-in Regenerative Resistor(W) | 170 | |
| Control Method | Sine-wave PWM control/current control method | |
| Dynamic Brake | Built-in | |
| Protective Functions | Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, under-voltage protection, instantaneous power failure protection, over-speed protection, error excessive protection, magnetic pole detection protection, linear servo control fault protection | |
| Fully Closed Loop Control | Available in the future | |
| Safety Function | STO (IEC/EN 61800-5-2) | |
| Communication Function | USB: Connect a personal computer (MR Configurator2 compatible) | |
| Structure (IP Rating) | Force cooling, open (IP20) | |
| Close Mounting | Not possible | |
| Weight (kg) | 6.2 | |
There are currently no product reviews.

 
            
            