A61L-0001-0096 compatible LCD display 14 inch for CNC machine replace CRT monitor

This LCD display replace the Fanuc 14" CRT Display Module Model D15CM-01A, A61L-0001-0096 

Note: A61L-0001-0074 and 0094 model with the same (standard 9 pin, FANUC standard signal line, 100-240V to DC 12 power), the signal interface can be connected directly, customers only need to connect two power lines.

A61L-0001-0096 comes with Different signal interface and 100-240V to DC 12 power supply.

The replacement LCD monitor specification as follows:

1. support 15KHz to 48KHz frequency line signal, field frequency from 48Hz to 75Hz, the positive and negative automatic adaptation, input line field automatic frequency scanning.
2. support field input for digital TTL signals or analog signals.
3. input interface: D-sub, 15PIN, BNC interface and other interfaces, can be customized.
4. support black and white display, monochrome display, color display, true color display.

5., support automatic recognition of the screen, adjust the width.

6. support separation of synchronous signal HV, composite synchronization signal Cs or synchronous signal compound in the video G signal (Sog), polarity, positive and negative are automatically identified.

7.75-500 ohm high input impedance, suitable for all kinds of strong and weak signal source

Technical parameters of  industrial screen:

The Old CRT monitor A61L-0001-0096 as follows:

The replacement LCD display as follows:

You can replace it as following:

1^st, Remove the old CRT display and empty the original CRT position. See below

2^nd, Remove the old CRT display and empty the original CRT position. See below

The new LCD directly installed, the corresponding fixed screw holes, the signal wire is inserted, connect the power line can be, some parameters can be obtained by OSD display menu display optimization, thus completing the CRT replacement for A61L-0001-0094 liquid crystal process.

3^rd,The display after installing

Because of we improvement all the time, the above images may have a little difference with the actual image. We reserve the right to revise the picture. We will try to put the pictures of the latest, if any other questions, please feel free to contact us.

Our products all adopt imported industrial LCD panel and power supplies from companies such as SHARP & AUO to ensures that it has a long service life, low failure rate, suitable for working condition of continuous use of 24 hours, without daily maintenance, with exactly same mechanical size of the original hole site, and can quickly restore production as long as to plug in the signal interface and power interface. Compared with the original CRT monitor, LCD monitor has advantages of simple structure, lower power consumption, little daily breakdown, strong vibration resistance, strong electromagnetic interference resistance, simple maintenance, light weight, and easier to standardization, etc.

All models are of regular stock to ensure rapid delivery and some special use display can be customized.