Your cart is empty.
863S22+3DM583 Stepper Motor Drive kit NEMA34 86mm 2.3NM 5.0A 3ph 18-50VDC For CNC Engraving Machine
- Model: 863S22+3DM583
- Shipping Weight: 3Kg
- In Stock:20
- Manufactured by: Leadshine
0 reviews
| 863S22+3DM583 Stepper Motor Drive kit NEMA34 86mm 2.3NM 5.0A 3ph 18-50VDC For CNC Engraving Machine |
3DM583
Introductions:
The 3DM683 is a versatility fully digital stepping driver based on a DSP with advanced control algorithm. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drives on the markets. Its unique features make the 3DM683 an ideal solution for applications that require low-speed smoothness.
Compared to the 3ND583, broader input voltage and output current ranges make the 3DM683 can drive much more motors than the 3ND583, also smaller motor noise, lower heating.
Features:
*Extra-low motor noise offers excellent quietness
*Anti-Resonance, provides optimum torque and nulls mid-range instability
*Self-test and Auto-configuration technology, offers optimum responses with different motors
*Microstep resolutions programmable, from full-step to 102,400 steps/rev
*Supply voltage up to +60 VDC
*Output current programmable, from 0.5A to 8.3A
*Pulse input frequency up to 200 KHz
*Automatic idle-current reduction
*Supports PUL/DIR and CW/CCW modes
*Suitable for 3/6 leads 3-phase motors
Specifications:
|
Parameters |
3DM683 |
|||
|
Min |
Typical |
Max |
Unit |
|
|
Output current |
0.5 |
- |
8.3 (5.9 RMS) |
A |
|
Supply voltage |
+20 |
- |
+60 |
VDC |
|
Logic signal current |
7 |
10 |
16 |
mA |
|
Pulse input frequency |
0 |
- |
200 |
kHz |
|
Isolation resistance |
500 |
|
|
MΩ |
Applications:
Suitable for a wide range of stepping motors, from NEMA frame size 17 to 34. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the 3DM683 an ideal solution for applications that require both low-speed smoothness and high speed performances.
863S22
Features:
*3-phase hybrid step motor
*High torque design
*Standard NEMA 34 dimensions
*Delta wiring
*Optimized for microstepping
Specifications:
General
|
|
Step Angle |
1.2° |
|||||||||||
|
|
Step Angle Accuracy |
+5%(full step, no load) |
|||||||||||
|
|
Temperature Rise |
80°CMax |
|||||||||||
|
|
Ambient Temperature |
-10°C -- +50°C |
|||||||||||
|
|
Insulation Resistance |
100MΩmin.500VDC |
|||||||||||
|
|
Dielectric Strength |
500VAC for one minute |
|||||||||||
|
|
Shaft Radial Play |
0.06 Max.(450g-load) |
|||||||||||
|
|
Shaft Axial Play |
0.08 max.(450g-load) |
|||||||||||
|
Model No. |
Step Angle |
Holding Torque |
Current /phase |
Inductance /phase |
Resistance /phase |
# of leads |
Rotor Inertia |
Detent Torque |
Motor Weight |
Motor Length L |
|
||
|
(°) |
N.m |
A |
mH |
Ohm |
g.cm2 |
N.cm |
Kg |
mm |
|
||||
|
863S22 |
1.2 |
2.0 |
5.0 |
2.8 |
0.9 |
6 |
1200 |
- |
2.1 |
73 |
|
||
|
863S42 |
1.2 |
4.0 |
5.0 |
4.5 |
1.35 |
6 |
2500 |
- |
3.0 |
105 |
|
||
|
863S68H |
1.2 |
6.78 |
3.5 |
20 |
4.5 |
6 |
3300 |
- |
3.8 |
127 |
|
||
Matching drives:
|
Model |
Match drives |
|
863S22 |
3DM683/3DM883 |
|
863S42 |
3DM683/3DM883 |
|
863S68H |
3DM683/3DM883 |
Applications:
Suitable for all kinds of small and medium-sized automation equipment and instruments, such as: engraving machine, marking machine, cutting machine, laser typesetting, plotter and CNC machine tools, automatic assembly equipment, etc. The efficiency is very high for the users who expect low vibration, little noise, high precision and high speed small equipments.
There are currently no product reviews.
