Your cart is empty.
3S57Q-04079+3M458 3PH 57mm NEMA23 5.8A 1.5NM 214ozin 24-40VDC Stepper motor Drive kits
- Model: 3S57Q-04079+3M458
- Shipping Weight: 2Kg
- In Stock:10
- Manufactured by: Kinco
0 reviews
Specifications
|
Model |
3S57Q-04079 |
|
Step Angle |
1.2centigrade degree±5% |
|
Phase Current (A) |
5.8 |
|
Holding Torque (Nm) |
1.5 |
|
Damping Torque (Nm) |
0.07 |
|
Winding Resistance (ohm) |
1.05±10% |
|
Winding Inductance(mH) |
2.4±20% |
|
Motor Inertia (Kg.com²) |
0.48 |
|
Motor Length L(mm) |
79 |
|
Number of Lead Wires |
6 |
|
Insulation Class |
B |
|
Withstand Voltage Level |
600VAC 1S 5mA |
|
Max.Axial Load (N) |
15 |
|
Max.Readial Load (N) |
75 |
|
Operating Temperature |
-20centigrade degree~50centigrade degree |
|
Surface Temperature Rise |
Max.80centigrade degree (Rated Phase Current after Phases are Connected) |
|
Insulation Impedance |
Minimum 100Mohm,500VDC |
|
Weight (Kg) |
1 |
Hybrid Servo Drive 3M458
Features:
The AC Servo Drive Principle is Used,Providing AC Servo Rotation Characteristics and Three-Phase Sine Wave Current Output;
The Internal Drive DC Voltage Reaches 40V,Which can Provide Better High-Speed;
Supporting Automatic Half Current Function of Motors in Statically Locked Status, which can Greatly Reduce Heat Dissipation of the Motors;
Supporting Subdivision Function up to 10,000 Steps/Revolution. The Subdivision Function can be Set by the DIP Switch, to Ensure the Best Operation Stability;
It has Little the Resonance and Creeping Area Common to Stepper Motors.The Output Phase Current can be Set through the DIP Switch,Featuring Very Low Operation Noise,Closing to the AC Servo Level.
Optical Coupling Devices are Used for the Isolation of the Input Circuit of the Control Signals to Reduce Interference of External Noises.
The Sine Current Drive Mode is Taken So that the No-Load Start Frequency of a Motor can Reach about 5KHz(100Steps/Revolution).
Specification
|
Model |
3M458 |
|
Supply Voltage |
DC 24V ~40V |
|
Output Phase Current |
3A~ 5.8A |
|
Control Signal Input Current |
6~16mA |
|
Cooling Method |
Natural Air Cooling |
|
Operating Environment |
Avoid the Environment with a Great Amount of Metallic Powder, Oil Mist, or Erosive Gases |
|
Operating Temperature |
-10centigrade degree~ +45centigrade degree |
|
Operating Humidity |
< 85% (Non-Condensing) |
|
Weight |
0.7 Kg |
There are currently no product reviews.
