3S57Q-04042+3M880N 3PH 57mm NEMA23 5.2A 0.45NM 64ozin 24-70VDC Stepper motor Drive kits

  • Model: 3S57Q-04042+3M880N
  • Shipping Weight: 1.5Kg
  • In Stock:10
  • Manufactured by: Kinco
Qty:          Favorite

Payment method Shipping method Contact us


0 reviews


Specifications

Model

3S57Q-04042

Step Angle

1.2centigrade degree±5%

Phase Current (A)

5.2

Holding Torque (Nm)

0.45

Damping Torque (Nm)

0.02

Winding Resistance (ohm)

1.3±10%

Winding Inductance(mH)

1.4±20%

Motor Inertia (Kg.com²)

0.11

Motor Length L(mm)

42

Number of Lead Wires

6

Insulation Class

B

Withstand Voltage Level

600VAC 1S 5mA

Max.Axial Load (N)

15

Max.Readial Load (N)

75

Operating Temperature

 -20centigrade degree~50centigrade degree

Surface Temperature Rise

Max.80centigrade degree (Rated Phase Current after Phases are Connected)

Insulation Impedance

Minimum 100Mohm,500VDC

Weight (Kg)

0.45

Hybrid Servo Drive 3M458

Features:

The AC Servo Drive Principle is Used,Providing AC Servo Rotation Characteristics and Three-Phase Sine Wave Current Output;
The Internal Drive DC Voltage Reaches 40V,Which can Provide Better High-Speed;
Supporting Automatic Half Current Function of Motors in Statically Locked Status, which can Greatly Reduce Heat Dissipation of the Motors;
Supporting Subdivision Function up to 10,000 Steps/Revolution. The Subdivision Function can be Set by the DIP Switch, to Ensure the Best Operation Stability;
It has Little the Resonance and Creeping Area Common to Stepper Motors.The Output Phase Current can be Set through the DIP Switch,Featuring Very Low Operation Noise,Closing to the AC Servo Level.
Optical Coupling Devices are Used for the Isolation of the Input Circuit of the Control Signals to Reduce Interference of External Noises. 
The Sine Current Drive Mode is Taken So that the No-Load Start Frequency of a Motor can Reach about 5KHz(100Steps/Revolution).

Specification

Model 

3M458

Supply Voltage

DC 24V ~40V

Output Phase Current

3A~ 5.8A

Control Signal Input Current

6~16mA

Cooling Method

Natural Air Cooling

Operating Environment

Avoid the Environment with a Great Amount of Metallic Powder, Oil Mist, or Erosive Gases

Operating Temperature

-10centigrade degree~ +45centigrade degree

Operating Humidity

< 85% (Non-Condensing)

Weight

0.7 Kg

There are currently no product reviews.

1 2 3 4 5
Five Stars
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed