Your cart is empty.
3M2280N Kinco Stepper Driver 3ph 8A 220VAC New
- Model: 3M2280N
- Shipping Weight: 2Kg
- In Stock:20
- Manufactured by: Kinco
0 reviews
Features:
Input Voltage:Single-Phase 220V AC +/-15% (50Hz)(187VAC~253VAC)
Output Current(Peak,Unit:A):2.8-8.0
Input Current:6~16mA
Micro Step:400~20,000
High Performance, Low Cost, and Diversified Functions
The Input Voltage of 3M2280N is 187V~253V.
Automatic Parameter Adjustable Regulation
Driver Test Running Function
Phase Memory Function
PLS+DIR and CW/CCW Control Signal Available.
Optocoupler Isolation I/O. There is an ERR Signal Output.
The Driver will Reduce the Phase Current of the Motor by a Half in 1.5 Seconds.
Opto-Isolation Signal Input, With Pulse Response Frequency up to 400 KHz
14 Micro-Step Value, the Maximum Micro-Step Value is 20000 Pulse/Rev.The Maximum Output Phase Current is 8A(Peak).
With the Protection Function of Over-Voltage, Under-Voltage, Over-Current, Overheat
With Step Smooth Filter,Can Smooth the Input Pulse,Reduce the Transient Motion of Motor,Make the Motor Runs More Smoothly.
Specification
|
Model |
3M2280N |
|||||||||
|
Parameter Lable |
||||||||||
|
Input Voltage |
3M2280N: Single-Phase 220V AC +/-15% (50Hz)(187VAC~253VAC) |
|||||||||
|
Output Current |
2.8, 3.2, 3.6, 4.0, 4.4, 4.8, 5.2, 5.6, 6, 6.4, 6.8, 7.2, 7.6 8.0 |
|||||||||
|
Micro Step |
400, 500, 600, 800, 1000, 1200, 1500, 2000, 3000, 4000, 5000, 6000, 10000, 20000 |
|||||||||
|
Input Signal |
Three Control Signal Ports: PLS(CW)/DIR(CCW)/FRE; Current Range: 6 ~16 mA |
|||||||||
|
Control Signal Input Method |
PLS+DIR; CW/CCW |
|||||||||
|
Output Signal |
ERR, Open Collector Output, Max Current: 10 mA. |
|||||||||
|
Automatic Half-Current |
The Driver Will Reduce the Phase Current of the Motor by a Half in 1.5 Seconds. |
|||||||||
|
Protection |
Over-Voltage, Under-Voltage, Short Circuit, and Overheat Protection |
|||||||||
|
Absorbing Circuit* |
Need Customize, Used to Absorb the Energy Feed Back by the Motor |
|||||||||
|
Environment Parameter |
||||||||||
|
Cooling Way |
Forced Air Cooling |
|||||||||
|
Environment |
Operation Environment |
Avoid the Environment with Great Amount of Metallic Powder, Oil mist, or Erosive Gases. |
||||||||
|
Operation Humidity |
<85%, RH (Non-Condensing or Water Drops) |
|||||||||
|
Operation Temperature |
0centigrade degree ~ +40centigrade degree |
|||||||||
|
Storage Temperature |
-20centigrade degree ~ +70centigrade degree |
|||||||||
|
Weight |
1.5Kg |
|||||||||
|
Dimensions |
201mm×147mm×66mm |
|||||||||
|
Protect Level |
IP20 |
|||||||||
|
Function of Rotary Switch |
||||||||||
|
S1,Micro-Step: |
||||||||||
|
S1 |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
||
|
Pulse/rev |
400 |
500 |
600 |
800 |
1000 |
1200 |
1500 |
2000 |
||
|
S1 |
8 |
9 |
A |
B |
C |
D |
E |
F |
||
|
Pulse/rev |
3000 |
4000 |
5000 |
6000 |
10000 |
20000 |
SET1 |
SET2 |
||
|
S2,Current: |
||||||||||
|
Mode |
PLS+DIR |
|
|
|
|
|
|
|
||
|
S2 |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
||
|
Peak(A) |
2.8 |
3.2 |
3.6 |
4 |
4.4 |
4.8 |
5.2 |
5.6 |
||
|
Rms(A) |
1.98 |
2.26 |
2.55 |
2.83 |
3.11 |
3.39 |
3.68 |
3.96 |
||
|
Mode |
CW/CCW |
|
|
|
|
|
|
|
||
|
S2 |
8 |
9 |
A |
B |
C |
D |
E |
F |
||
|
Peak(A) |
6 |
6.4 |
6.8 |
7.2 |
7.6 |
8 |
M1 |
M2 |
||
|
Rms(A) |
4.24 |
4.53 |
4.81 |
5.09 |
5.37 |
5.66 |
|
|||
There are currently no product reviews.
