JMC 3DM3722 3 phase nema 43 nema52 hybrid stepper motor driver/controller/amplifier 80-260VAC 32bit DSP

• Dual mode for high and low voltage, suitable for the 50V to 300V motor.
• Dual mode for single and double pulse, suitable for pulse + direction mode and CW, CCW double pulse mode.
• Have a big torque communication control mode.
• Integrated motion control function, no need to use PLC or motion controller.
• Through the touch screen, can do the direct control or parameter Download.
• It is provided with 16 microstep setting of equal angle and constant torque, maximum resolution of 60000 step per revolution.
• The highest reaction frequency up to 500Kpps, is 2.5 times of traditional driver.
• The step pulse stop more than 100ms, coil current automatically reduced to half of the setting current.
• The photoelectric isolation signal input / output
• The 5V, 12V, 24V signal input are compatible, no need to add external resistor to limit current. 
• The drive current effective value from 1.2A /phase to 7.0A / phase,
• The single power input, voltage range: AC80V-240V

Typical applications：

CNC cutting/engraving, lazer, textile machine, etc.

Introduction:

JMC 3DM3722 is new digital stepper motor driver which adopts latest 32-bit DSP control technology and built-in microstepping technology. Users can set microsteps within 25600step/rev, and any current value within rated current range. 3DM3722 driver greatly improves stability and reduces noise under low subdivision. Automatic parameter tuning is integrated inside this driver, can helpdriver automatically adjust to best operation parameters to maximize performance of different stepper motors.

Electrical Specifications:

Environment:

Microstep Resolution Setting:

Micresstep setting is set by DIP-2,There are 16 choice in total and was set by the D1-D4 switch,D5-D6 switch are function setting. The folling is the form:m