2S56Q-02976+2M860 2PH 56mm NEMA23 3A 1.5NM 214ozin 24-70VDC Stepper motor Drive kits

  • Model: 2S56Q-02976+2M860
  • Shipping Weight: 2.5Kg
  • In Stock:10
  • Manufactured by: Kinco
Qty:          Favorite

Payment method Shipping method Contact us


0 reviews


Specifications

Model

2S56Q-02976

Step Angle

1.8centigrade degree±5%

Phase Current (A)

3

Holding Torque (Nm)

1.5

Damping Torque (Nm)

0.07

Winding Resistance (ohm)

0.95±10%

Winding Inductance(mH)

3.4±20%

Motor Inertia (Kg.com²)

0.46

Motor Length L(mm)

76

Number of Lead Wires

4

Insulation Class

B

Withstand Voltage Level

500VAC,one minute

Max.Axial Load (N)

15

Max.Readial Load (N)

75

Operating Temperature

 -20centigrade degree~50centigrade degree

Surface Temperature Rise

Max.80centigrade degree (Rated Phase Current after Two Phases are Connected)

Insulation Impedance

Minimum 100Mohm,500VDC

Weight (Kg)

1

Lead Wire Length (mm)

300±5

Hybrid Servo Drive 2M860

Features:

The Maximum Supply Voltage can Reach 80V, Which can Provide Better Dynamic Drive Performance;

The Bipolar Constant Current Drive Mode is Taken with a Maximum Drive Current up to 6.0A Per Phase, Which can Drive any Two-Phase Bipolar Hybrid Stepper Motors with a Current Less than 6.0A;

The Drive Output Phase Current of a Motor can be Regulated through the DIP Switch, to Match Motors of Different Specifications;

Supporting Automatic Half Current Function of Motors in Statically Locked Status, Which can Greatly Reduce Heat Dissipation of the Motors;

A Dedicated Control Chip is Used, with a Maximum of 256/200 Subdivisions. The Subdivision Function can be Set by the DIP Switch, to Ensure the Best Operation Stability;

Supporting Offline Function So That the Output Current of a Motor can be Cut Off If Necessary;

Optical Coupling Devices are Used for the Isolation of the Input Circuit of the Control Signals to Reduce Interference of External Noises.

Supporting Such Protection Functions as Overvoltage, Over Current, Out-of-Phase, and Output Short Circuit;

If the Drive Red LED Indicator Lights up, It Indicates that It Is in Protected Status. Turn Off the Power Supply, and Recheck the Wiring. It can Only be Operated Properly After the Power Supply is Turned on Again;

Specification

 Model

 2M860

Supply Voltage

DC 24V ~70V

Output Phase Current

2.5A~6.0A

Control Signal Input Current

6~16mA

Cooling Method

Natural Air Cooling

Operating Environment

Avoid the Environment with a Great Amount of Metallic Powder, Oil Mist, or Erosive Gases

Operating Temperature

-10centigrade degree~+45centigrade degree

Operating Humidity

< 85% (Non-Condensing)

Weight

0.7 Kg

There are currently no product reviews.

1 2 3 4 5
Five Stars
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed