2S56Q-02976+2M530 2PH 56mm NEMA23 3A 1.5NM 214ozin 24-48VDC Stepper motor Drive kits

  • Model: 2S56Q-02976+2M530
  • Shipping Weight: 2.5Kg
  • In Stock:10
  • Manufactured by: Kinco
Qty:          Favorite

Payment method Shipping method Contact us


0 reviews


Specifications

Model

2S56Q-02976

Step Angle

1.8centigrade degree±5%

Phase Current (A)

3

Holding Torque (Nm)

1.5

Damping Torque (Nm)

0.07

Winding Resistance (ohm)

0.95±10%

Winding Inductance(mH)

3.4±20%

Motor Inertia (Kg.com²)

0.46

Motor Length L(mm)

76

Number of Lead Wires

4

Insulation Class

B

Withstand Voltage Level

500VAC,one minute

Max.Axial Load (N)

15

Max.Readial Load (N)

75

Operating Temperature

 -20centigrade degree~50centigrade degree

Surface Temperature Rise

Max.80centigrade degree (Rated Phase Current after Two Phases are Connected)

Insulation Impedance

Minimum 100Mohm,500VDC

Weight (Kg)

1

Lead Wire Length (mm)

300±5

Hybrid Servo Drive 2M530

Features:

The Maximum Supply Voltage can Reach 40V, Which can Provide Better Dynamic Drive Performance;

The Bipolar Constant Current Drive Mode is Taken with a Maximum Drive Current up to 2.5A Per Phase, Which can Drive any Two-Phase Bipolar Hybrid Stepper Motors with a Current Less than 2.5A;

The Drive Output Phase Current of a Motor can be Regulated Through the DIP Switch, to Match Motors of Different Specifications;

A DIP Switch is Used to Set the Automatic Half Current Function of Motors in Statically Locked Status, which can Greatly Reduce Heat Dissipation of the Motors;

A Dedicated Control Chip is Used, with a Maximum of 256/200 Subdivisions. The Subdivision Function can be Set by the DIP Switch, to Ensure the Best Operation Stability;

Supporting Offline Function, So that the Output Current of a Motor can be Cut Off If Necessary;

Optical Coupling Devices are Used for the Isolation of the Input Circuit of the Control Signals to Reduce Interference of External Noises.

Specification

Model

2M530

Supply Voltage

DC 24V ~ 48V

Output Phase Current

1.2A~ 3.5A

Control Signal Input Current

6~16mA

Cooling Method

Natural Air Cooling

Operating Environment

Avoid the Environment with a Great Amount of Metallic Powder, Oil Mist, or Erosive Gases

Operating Temperature

-10centigrade degree~ +45centigrade degree

Operating Humidity

< 85% (Non-Condensing)

Weight

0.7 Kg

There are currently no product reviews.

1 2 3 4 5
Five Stars
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed