Your cart is empty.
2S110Q-047F0+2M1180N 2PH 110mm NEMA42 6.5A 21NM 3000ozin 77-123VAC Stepper motor Drive kits
- Model: 2S110Q-047F0+2M1180N
- Shipping Weight: 11Kg
- In Stock:10
- Manufactured by: Kinco
0 reviews
Specifications:
|
Model |
2S110Q-047F0 |
|
Step Angle |
1.8centigrade degree±5% |
|
Phase Current (A) |
6.5 |
|
Holding Torque (Nm) |
21 |
|
Damping Torque (Nm) |
0.59 |
|
Winding Resistance (ohm) |
0.72±10% |
|
Winding Inductance(mH) |
12.8±20% |
|
Motor Inertia (Kg.com²) |
10.9 |
|
Motor Length L(mm) |
150 |
|
Number of Lead Wires |
4 |
|
Insulation Class |
B |
|
Withstand Voltage Level |
500VAC,One Minute |
|
Max.Axial Load (N) |
60 |
|
Max.Readial Load (N) |
220 |
|
Operating Temperature |
-20centigrade degree~50centigrade degree |
|
Surface Temperature Rise |
Max.80centigrade degree (Rated Phase Current After Two Phases are Connected) |
|
Insulation Impedance |
Minimum 100Mohm,500VDC |
|
Weight (Kg) |
8.4 |
Hybrid Servo Drive 2M1180N
Features:
High-Performance, Low Prices;
The Input Voltage of 2M1180N is 77VAC~123VAC (Single-Phase);
Automatic Parameter Adjustable Regulation;
Phase Memory Technology: Remember the Phase Position of the Motor When the Motor Stopped, when Re-Power the Driver, the Motor Won’t Shake Anymore;
PLS+DIR and CW/CCW Control Signal Available;
Supply Optocoupler Isolated ERR Output Signal;
Automatic Semi-Current Locking, Reduce the Motor’s Heat Drastically;
Optocoupler Isolated Signal Input Circuit. The Maximum Frequency of Control Signal is Up to 400k Hz;
12 Micro-Step Value, the Maximum Micro-Step Value is 128;
With the Protection Function of Overvoltage, Undervoltage, Short Circuit and Heat Protection.
Specification
|
Model |
2M1180N |
|||||||||
|
Parameter Lable |
||||||||||
|
Parameter |
Value |
|||||||||
|
Input Voltage |
Single Phase 77VAC~123VAC,(50Hz) |
|||||||||
|
Output Current |
4.5A,5A,5.5A,6A,6.5A,7A,7.5A,8A |
|||||||||
|
Micro Step |
2/4/5/8/10/16/20/32/50/64/100/128 |
|||||||||
|
Input Signal |
PLS/DIR/FRE Current Limit: 6~16 mA |
|||||||||
|
Control Signal Mode |
PLS + DIR, CW/CCW |
|||||||||
|
Output Signal |
Prot: ERR( Maximum Output Current: 10mA ) |
|||||||||
|
Protection |
Overvoltage, Under Voltage, Short Circuit and Heat Protection. |
|||||||||
|
Brake Mode * |
Available to Connect the Power Resister. Need Custom. |
|||||||||
|
Environment Parameter |
||||||||||
|
Cooling Way |
Fan |
|||||||||
|
Environment |
Operation Environment |
Avoid the Environment with Great Amount of Metallic Powder, Oil Mist, or Erosive Gases. |
||||||||
|
Operation Humidity |
<85%, RH |
|||||||||
|
Operation Temperature |
0centigrade degree~+40centigrade degree |
|||||||||
|
Storage Temperature |
-20centigrade degree~+70centigrade degree |
|||||||||
|
Weight |
1.5Kg |
|||||||||
|
Dimensions |
210mm×147mm×66mm |
|||||||||
|
Protect Level |
IP20 |
|||||||||
|
Function of Rotary Switch |
||||||||||
|
S1,Micro-step: |
||||||||||
|
S1 |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
||
|
Micro Step |
2 |
4 |
5 |
8 |
10 |
16 |
20 |
32 |
||
|
Pulse/rev |
400 |
800 |
1000 |
1600 |
2000 |
3200 |
4000 |
6400 |
||
|
S1 |
8 |
9 |
A |
B |
C |
D |
E |
F |
||
|
Micro Step |
50 |
64 |
100 |
128 |
NA |
NA |
TEST |
NA |
||
|
Pulse/rev |
10000 |
12800 |
20000 |
25600 |
||||||
|
S2,Current: |
||||||||||
|
Mode |
PLS+DIR |
|
|
|
|
|
|
|
||
|
S2 |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
||
|
Rms(A) |
3.18 |
3.54 |
3.89 |
4.24 |
4.6 |
4.95 |
5.3 |
5.65 |
||
|
Peak(A) |
4.5 |
5 |
5.5 |
6 |
6.5 |
7 |
7.5 |
8 |
||
|
Mode |
CW/CCW |
|
|
|
|
|
|
|
||
|
S2 |
8 |
9 |
A |
B |
C |
D |
E |
F |
||
|
Rms(A) |
5.65 |
5.3 |
4.95 |
4.6 |
4.24 |
3.89 |
3.54 |
3.18 |
||
|
Peak(A) |
8 |
7.5 |
7 |
6.5 |
6 |
5.5 |
5 |
4.5 |
||
There are currently no product reviews.
