Your cart is empty.
2M415 2phase NEMA17 stepper motor driver controller amplifier DC24-36V 0.21-1.5A
- Model: 2M415
- Shipping Weight: 0.5Kg
- In Stock:50
0 reviews
Model:2M415
Name:2M415 JMC stepper motor driver
Detailed information:
performance index:
2M415 subdivision two-phase hybrid stepper motor drive, DC 18~36V power supply, the current is less than 3A, for the outer diameter of 35~42 mm of the two-phase hybrid stepper motor. This driver uses DSP AC servo driver of the current loop control, the motor torque ripple minimum, low speed operation is very smooth, almost no vibration and noise. At high speed, the torque is much higher than the other two phases, and the positioning accuracy is high.
Application: widely used in textile machinery, laser marking machine, laser engraving machine, testing equipment, electronic equipment.
features:
1 high performance, low price, low noise, excellent stability
2 average current control, two phase sinusoidal current drive output
3 DC 18-36V power supply
4 photoelectric isolation signal input / output
Seven 5 phase current setting
Seven 6 profile subdivision and automatic half flow function
7 has an offline command input terminal
8 the torque of the motor is related to the speed of the motor, which has nothing to do with the number of steps per revolution.
9 high starting speed
Electrical index Environmental indicator
|
Instructions |
Min |
Typical |
Max |
|
cooling |
Natural cooling or forced cooling |
|
|
voltage(VDC) |
18 |
24V |
.36 |
Use environment |
occasion |
Avoid dust, oil mist and corrosive gases. |
|
|
Working current(A) |
0.21 |
----- |
1.5 |
Storage temperature |
-40·~70· |
||
|
Logic input current (mA) |
|
10 |
|
Maximum ambient temperature |
-10·~45· |
||
|
Step pulse rate (KHZ) |
---- |
---- |
200 |
Ambient humidity |
Not dew, not water |
||
|
Pulse low time (US) |
2.5 |
---- |
---- |
Vibration |
|
5.9m/s2Max |
|
|
|
|
|
|
weight |
|
0.1Kg |
|
Current, subdivision dial switch setting
|
Dip switch setting: |
Current set |
|
Microsteps set |
|||||||
|
Dip switch 1 2 3 |
Current(A) |
Dip switch 4 5 6 |
micro |
|||||||
|
0 |
1 |
1 |
0.21A |
1 |
1 |
1 |
1 |
|||
|
1 |
0 |
1 |
0.42A |
0 |
1 |
1 |
2 |
|||
|
0 |
0 |
1 |
0.63A |
1 |
0 |
1 |
4 |
|||
|
1 |
1 |
0 |
0.84A |
0 |
0 |
1 |
8 |
|||
|
0 |
1 |
0 |
1.05A |
1 |
1 |
0 |
16 |
|||
|
1 |
0 |
0 |
1.26A |
0 |
1 |
0 |
32 |
|||
|
0 |
0 |
0 |
1.50A |
1 |
0 |
0 |
64 |
|||
interface functions
P1 input signal interface description
|
symbol |
function |
description |
|
PLS+ |
Input signal photoelectric isolation positive end |
Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance |
|
PLS- |
Step pulse signal |
Down along the effective, whenever the pulse from high to low when the motor to take a step. Input resistance 220 ohm, requirements: low level 0~0.5V, high level 4~5V, pulse width >2.5uS. |
|
DIR+ |
Input signal photoelectric isolation positive end |
Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance |
|
DIR- |
Direction control signal |
Used to change the steering of a motor. Input resistance 220 ohm, requirements: low level 0~0.5V, high level 4~5V, pulse width >2.5uS. |
|
ENA+ |
Input signal photoelectric isolation positive end |
Connected to the +5V power supply, +5V~+24V can be driven, higher than the +5V to be connected to the current limiting resistance |
|
ENA- |
Motor release signal |
Active (low level) when turn off the motor coil current, the drive stops working, the motor is in a free state. |
|
phase |
Model |
Current(A) |
Voltage(V) |
micorsteps |
For motor |
weight(kg) |
size(mm) |
Control signal |
|
2phase |
2M415 |
0.21-1.5A |
DC(24-36V) |
2-64 |
35.42 |
0.2 |
86*55*20 |
single |
|
2M420 |
0.3-2.5A |
DC(24-48V) |
2-128.5-125 |
42.57 |
0.2 |
118*75.5*33 |
single |
|
|
2M542-N |
1.0-4.2A |
DC(24-48V) |
2-128.5-125 |
57.86 |
0.27 |
118*75.5*34 |
differential |
|
|
2M656 |
1.3-5.6A |
DC(24-48V) |
1-64.2.5-50 |
57.86 |
0.27 |
118*75.5*34 |
differential |
|
|
2M982 |
1.8-7.8 |
DC(30-80V) |
1-64.2.5-50 |
57.86 |
0.57 |
150*97.5*48 |
differential |
|
|
2MA860H |
2.5-6A |
AC(50-80V) |
1-64.2.5-50 |
57.86.110 |
0.6 |
150-97.5*53 |
differential |
|
|
MA960H |
2.5-6A |
AC(50-80V) |
2-64 |
57.86.110 |
0.6 |
150*97.5*53 |
differential |
|
|
2M2260 |
2.5-6A |
AC(80-220V) |
1-64.2.5-50 |
86.110.130 |
1.5 |
198*104*86 |
differential |
|
|
2M2280 |
2.2-8.5A |
AC(80-220V) |
1-64.2.5-50 |
110.130 |
1.8 |
198*136.5*88 |
differential |
|
|
|
3M660 |
1.3-5.8A |
DC(24-48V) |
1-64.2.5-50 |
57.86 |
0.27 |
118*75.5*34 |
differential |
|
3M860 |
2.0-8.3A |
DC(24-80V) |
1-64.2.5-50 |
57.86 |
0.57 |
150*97*48 |
differential |
|
|
3M2060H |
1.3-5.6A |
AC(80-220V) |
1-64.2.5-50 |
86.110.130 |
1.5 |
198*104*86 |
differential |
|
|
3M2080 |
2.2-8.5A |
AC(80-220) |
1-64.2.5-50 |
110.130 |
1.5 |
198*136.5*88 |
differential |
There are currently no product reviews.
